Clean Your Homes Siding With A Pressure Washer

Pressure washing is one quick and thorough way to clean the exterior of your house. The same results are achievable when using cold water and the right cleaners but without the risk of damage to the siding or landscaping that hot water can cause. Without the proper equipment, some home owners are tempted to get up on a ladder and attempt to pressure wash their siding. Pulling the trigger on a pressure actuated pump always causes the spray wand to kick and could easily knock you off of a ladder or any elevated platform. Even most big box store bought machines will put out 2000-2500 psi which can easily damage vinyl siding, asphalt shingles and even wood decks. By changing the nozzle at the end of the gun with one that has a larger orifice, you can achieve a lower pressure.

The goal in sweeping a deck with a pressure washer is to remove the dirt leaving behind no traces of the pressurized water. Too little pressure, or having the fan too far from the water will result in a ‘less' cleaner surface. The tip should be at the same distance from the deck from the beginning of the stroke through the whole length of the board.

Failing to wash the vinegar off completely might make the area lighter in color when compared to the rest of the driveway. It is advisable to use cat litter when pressure cleaning your driveway as it is made up of other materials like concrete, gravel, etc.



Read the documentation that came with your pressure washer before beginning pressure washing Spring, TX any cleaning task and confirm that your model is appropriate for the job. Using a pressure washer incorrectly can damage a home exterior, so check the manual to find information on spray settings and how far the spray tip pressure washer parts spring tx should be from the surface you're cleaning. Pressure cleaning in Sydney cannot be overlooked due to the level of salt in the air.

Light duty pressure washers are rated less than 2000psi, which is good for cleaning or washing cars and boats along with general cleaning around the house. Lastly, you have the heavy duty pressure washers, which are rated to make water pressure of 3000psi or maybe more. Also, you may want to consider investing in a pressure washer that can eject hot and cold water as well as steam.

What ends up actually hitting the house or building is little more than a mist in most cases but can get up to 100 psi or so if the technician needs it to remove insect debris or spider nests. Photo by Senior Airman Ciara Wymbs courtesy of US Air Force and Defense Imagery Right: A small Kärcher pressure washer suitable for home use. Having said that, it's a good idea to test a pressure washer on an inconspicuous area before you start work to make sure it doesn't harm the surface you're cleaning. Put on gloves, spray brake cleaner onto the stain and pour kitty litter over the stain.

If you use a rotary (Dirt Killer) nozzle you can quickly handle even tougher jobs such as mold or mildew removal with this size pressure washer. The cleaning impact of pressure can be increased significantly by use of rotary (Dirt Killer) nozzles. This is because Dirt Killer nozzles work better the higher the pressure; (flow is a less important to make Dirt Killer nozzles effective). Based upon these factors a commercial cleaner would want a machine with at least 3,000 PSI and 4 GPM, to be able to handle a wide variety of cleaning problems. Traditionally, before the advent of rotary nozzles, to get more cleaning impact you needed more pressure and more flow.

Write a comment

Comments: 1

This is the sidebar.

Contact